Topic: Raspberry Pi for Nxt and Ardor (Read 1405 times)

Twister · « **on:** January 29, 2018, 12:18:02 am »

Hi All,

I am a hobbyist and have managed to set up a Raspberry pi 3 to run both NXT and Ardor by amalgamating various guides and tips that are out there. I plan to just use the accounts running on the pi to forge with leased balances so the forging is more secure, as I understand it. Everything seems to be up and running ok but I was wary before I started forging.

I have a few questions:

i) What private information (ip?) is leaking from doing this and what associations can be made, if any? I am thinking of preventing my family being kidnapped and held to ransom with data gleaned from my forging, if NXT/Ardor become as big as Bitcoin.

ii) What are the absolute musts I have to do to harden my ssh connection and any other security? (besides changing the password)

iii) Can you route through tor or is this not necessary?

iv) As some of the guides are old and run on the original Pi's, can I assume a Pi Zero can forge too?

Thank you.

kermitas · « **Reply #1 on:** January 29, 2018, 09:43:48 pm »

Quote from: Twister on January 29, 2018, 12:18:02 am

iv) As some of the guides are old and run on the original Pi's, can I assume a Pi Zero can forge too?

Ardor is just a Java app. If you have Java installed and enough of RAM memory (and disk space) then most likely Ardor will run

.

Twister · « **Reply #2 on:** January 30, 2018, 11:43:08 am »

Thanks for the post Kermitas.

I have been looking around more at some old threads. It seems 512 and even 256mb of ram is enough NXT, after some initial confusion (and assuming NXT makes similar demands as it did then).
ht tp s :/ /bit cointalk . org/index. php?topic=34 5619. msg4 9 71216# msg 4971216

Here is a good comparison chart for all the Raspberrys side by side.
h ttp://so cialc ompare .c om/en/com parison/ raspber rypi-m odels-comp arison

So the Zero has more RAM than the Rasp 2 or the original raspberry that have already run Nxt.

Ebereon did a solar forging guide, that is now down, on or before Feb 2014. And below are the release dates of the Pis
ht tp s ://bit cointalk.org/index .php?topic =412243.msg4 868490#msg4868490
h ttp s ://en.wiki pedia.or g/wiki/R aspberry_Pi

So Ebereon must have done his guide with either a Pi 1A or 1B. Both of these have the same processor and number of cores as the Zero, but the Zero is 1Ghz, instead of 700Mhz.

So, I think the Pi Zero W will work for forge. This is all assuming that NXT hasn't significantly increased in power and processing demands since 2014. And I am not missing something about how NXT works.

Is there a better place to find technical help than here?

Thanks all.

N.B. I can't post full links.

kermitas · « **Reply #3 on:** January 30, 2018, 12:43:02 pm »

Quote from: Twister on January 30, 2018, 11:43:08 am

Thanks for the post Kermitas.

I have been looking around more at some old threads. It seems 512 and even 256mb of ram is enough NXT, after some initial confusion (and assuming NXT makes similar demands as it did then).
ht tp s :/ /bit cointalk . org/index. php?topic=34 5619. msg4 9 71216# msg 4971216

Here is a good comparison chart for all the Raspberrys side by side.
h ttp://so cialc ompare .c om/en/com parison/ raspber rypi-m odels-comp arison

So the Zero has more RAM than the Rasp 2 or the original raspberry that have already run Nxt.

Ebereon did a solar forging guide, that is now down, on or before Feb 2014. And below are the release dates of the Pis
ht tp s ://bit cointalk.org/index .php?topic =412243.msg4 868490#msg4868490
h ttp s ://en.wiki pedia.or g/wiki/R aspberry_Pi

So Ebereon must have done his guide with either a Pi 1A or 1B. Both of these have the same processor and number of cores as the Zero, but the Zero is 1Ghz, instead of 700Mhz.

So, I think the Pi Zero W will work for forge. This is all assuming that NXT hasn't significantly increased in power and processing demands since 2014. And I am not missing something about how NXT works.

Is there a better place to find technical help than here?

Thanks all.

N.B. I can't post full links.

I suppose I was a first that had dozens of Rpi here in Poland. Then I switched to Pine64, http://scalaakka.blogspot.com/2016/08/finally-all-five-pine64-come.html as it has up to 2GB of RAM

. Check available models on their site or check Internet. Maybe today there is something even better (and in the same price).

drsnuggles · « **Reply #4 on:** February 02, 2018, 07:22:05 pm »

Two ways to give you a head start with your forging pi:
-Since processing the whole blockchain of the last few years is quite intensive for a Raspberry, I recommend downloading the NXT blockchain first on your PC. Then transfer it to your Raspberry. Note that this is not needed for Ardor. The Ardor blockchain is still very young and therefore small.
-Make sure to create a Ramdisk to store your Raspberry logfiles. If you don't, your OS will write very often to your SDcard only to find out the card has bad sectors in a few days.

Switch to ArdorForum

News:

Author Topic: Raspberry Pi for Nxt and Ardor (Read 1405 times)

Twister

Raspberry Pi for Nxt and Ardor

kermitas

Re: Raspberry Pi for Nxt and Ardor - privacy

Twister

Re: Raspberry Pi for Nxt and Ardor - privacy

kermitas

Re: Raspberry Pi for Nxt and Ardor - privacy

drsnuggles

Re: Raspberry Pi for Nxt and Ardor